Grundig CUC 2030 N Service Manual page 16

Limiting the programme position
selection
1
The ATS search saves all programmes it has found
and automatically "locks" the first position to which
no program is assigned. In this way, when pro-
2
gramme positions are selected step by step ("zap-
ping"), using buttons p, P only programmes
which have been found can be selected.
3
You may also enter this limit manually, in the exam-
ple the "lock" has been activated as of programme
position 6.
4
Press the h button and then G.
1
The page » DIALOG CENTER « will appear on the
screen.
5
2 Select the line » MANUAL TUNING « using button
p or P and confirm with G.
6
3 Select programme position 6 on the » MANUAL
TUNING « page with the F or E button.
4 Select the line called » C/S «, then select »Channel «
7
using F or E.
5 Select the line called » Channel «, then select » 00 «
using 0 ... 9.
Save this setting with G and exit using button ¢ 1
6 .
T XT
Now only the first 5 channel positions can be swit-
2
ched through in rapid sequence with the p or P
button.
All single digit channel positions – as well as the
3
"blocked" – can continue to be selected using the
digit buttons 0 ... 9."All" channel positions can
be selected using the digit buttons if a two digit
channel position is blocked.
Setting TV programmes manually
Press the h button and then the G button.
1
4
The page »DIALOG CENTER« appears.
Select the line »MANUAL TUNING« with the p or
2
P button and confirm with the G button.
5
6
MANUAL TUNING
Program 01
Channel
C/S
Channel C 34
Finetun. 00
Standard automatic
OK Memorize 0 – 9 TXT
Direct channel input
Select the programme position with the digit but-
tons 0 ... 9 or with the F or E button.
Select the line »C/S« with the p or P button.
Select »channel« or »s-channel« with the F or E
button.
Select the line »Channel« with the p or P button.
Enter the desired channel number with the digit
buttons 0 ... 9 or with the F or E button.
Select the line »Standard« witht the p or P button.
Select the required setting with the F or E button.
Fine-tune the picture if necessary. To do this select
the line »Finetun.« with button p or P.
Alter fine tuning with buttons F or E.
Store setting with the G button.
To set more programmes, repeat the procedure
starting at point 1 .
¢
End setting with the button.
T XT
Automatic search
Select the line »Channel« with the p or P button.
Start the automatic station search with the »blue«
button.
Select the line »Programme« with button p or P.
Select the channel position, at which you would like
to save the channel once found, with the numeric
buttons 0 ... 9 (01 – 99).
The colour and sound standards are allocated auto-
matically. If the colour and/or sound not correct,
select the line »Standard« with button p or P. Sel-
ect the required setting with the F or E button.
Fine-tune the picture if necessary. To do this select
the line »Finetun.« with button p or P.
Alter fine tuning with buttons F or E.
Store setting with the G button.
To set more programmes, repeat the procedure
starting at point 1 .
¢
End setting with the button.
T XT
Short description for TV operation
On this page the buttons of the remote control are
only briefly explained. Detailed descriptions can be
found in the various chapters.
0...9 Switch on set from standby;
or
T P
select programme position E L E I L O T 8 1 0 C
0
AV Select AV.
1 2 3
P
Move forwards from one program-
me position to the next (1, 2, 3 ...).
p
Move backwards from one program- 4 5 6
me position to the next (... 3, 2, 1)
or
7 8 9
p P
, Move the cursor up/down
F E
Volume;
0
or
F E
Move the cursor to the
left/rightts.
G
Switches between both of the
channels last viewed.
Changes and activates several
functions,
Switches to optimum values
and G).
(button -
h
Call up » DIALOG CENTER «
TV-GUIDE
h
and G).
(button
TXT
h
Clock ON/OFF (Time display only
for TV programmes with videotex
k
Select » Picture « menu.
™
Adjust colour intensit.
PIP
VIDEO Remote control GRUNDIG video
recorder (keep VIDEO button
VIDEO
depressed).
Remote control video recorder
You may also use the remote control for this TV set
to operate a GRUNDIG video recorder. Your
specialist dealer can inform you on which ones are
suitable.
Press the VIDEO button and keep it depressed.
This converts the remote control to video recorder
l l l l
operation.
Now press the required button.
p
The following list tells you which button operates
P
which recorder functions.
A
Switch set to standby.
¢
Sound on/off (mute)
¢
Videotext operatation TV operation
T XT
¢
D
ohne Funktion.
g Select » SOUND « menu..
®
Adjust brightnessn.
AUX
AUX Select » Aux « menu; sound selec-
and 2).
-
tion (with
SAT
SAT Remote control GRUNDIG satelliten
receiver (keep SAT button depres-
sed and select satellite program
using button p or P ).
E Switch picture format from 4:3 to
16:9 )
i
(Button – ) = Picture search backward
i
(Button +) = Picture search forward
k
(Button ) = Record start
g
(Button ) = Stop
v
(Button – ) = Rewind
v
(Button +) = Fast forward
j
(Button ) = Pause
h
(Button ) = Playback start
= Channel position –
= Channel position +