Attaching The Front Panel - Miele DA 3466 Operating And Installation Instructions

 Align the casing and screw the
retaining bracket onto the casing.
 Secure the spacer strip to the back of
the appliance from behind using 4
plastic rivets as shown.

Attaching the front panel

The front of the fume deflector can be
fitted with a front panel to match
existing cabinetry.
The front panel must not exceed
approx. 2.8 lbs. (1300 g). This applies to
front panels with a depth of up to
approx. 1" (30 mm). For larger and
heavier front panels, the weight must be
reduced.
A DML 400 installation kit, available as
an optional accessory, is required for
fitting a front panel.
 Follow the installation instructions
supplied.
Installation
37