Operation; Turning On The Blower; Selecting The Power Level - Miele DA 3466 Operating And Installation Instructions

Turning on the blower

 Pull out the fume deflector. For
optimum extraction with minimum
noise levels, always pull out the fume
deflector to its full extent.
The blower turns on at level 2. The 
symbol and 2 will light up in the blower
level display.

Selecting the power level

Power levels 1 to 3 can be used for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the B
booster level.
 Press the "" button for a lower
power level or the "" button to
select a higher level.
Automatic Booster setting
switch-off
You have the option to program the
booster level to ensure the fan will
always switch back to level 3
automatically after 10 minutes.
 To set this option, both the blower
and the overhead lighting must be
turned off and the fume deflector
pushed in.
 Press the  and  buttons at the
same time for approx. 10 seconds,
until 1 lights up.
 Then, press the following buttons in
succession:
– the lighting button ,
– followed by the  button and then
– the lighting button  again.
If automatic switch-off is not activated,
the 1 and B displays will flash.
 To activate it, press the  button.
If 1 and B are lit, automatic switch-off is
activated.
 To deactivate it, press the  button.
 Use the On/Off button  to confirm
your choice of setting.
If you do not confirm within 4
minutes, the system will revert to the
old setting.

Operation

17