Grease Filters And Edge Extraction Panel - Miele DA6881EB Operating And Installation Instructions

Downdraft
Table of Contents

Advertisement

Cleaning and care
Grease filters and edge
extraction panel
The edge extraction panel and the
reusable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapors, preventing soiling of the hood.
A dirty filter is a fire hazard!
Cleaning intervals
Grease which has collected in the
ventilation hood hardens over time and
makes cleaning more difficult. It is
therefore recommended that the edge
extraction panel and the grease filters
should be cleaned regularly (at least
every 3–4 weeks) to avoid a build-up of
grease.
After 30 operating hours, the grease
filter symbol  will light up when the
deflector plate is out to remind you to
clean the edge extraction panel and the
grease filters.
18
Removing the panel and grease
filters
 The panel is held in place by magnets
at the top. Pull the panel forwards by
the upper edge, unhook it at the
bottom and remove it.
 Open the grease filter retainer catch
and remove the filters.
 If charcoal filters are fitted on the
back of the grease filters, they must
be removed before cleaning (see
"Charcoal filters").

Advertisement

Table of Contents
loading

Table of Contents