Miele DA 3466 Operating And Installation Instructions page 34

Installation
 Secure the spacer strip underneath
the sides of the cabinetry, flush with
the rear wall.
 Draw a vertical line up both inside
walls of the cabinetry from the front
of the spacer strip.
34
 The brackets are designed for ⁵/₈"
and ³/₄" (16 and 19 mm) thick unit
sides. Orientate the bracket so that
the vertical depth matches the
thickness of the unit side.
Screw the brackets onto the right and
left inside walls of the housing unit as
shown. The back edge of the bracket
should align with the vertical line
drawn up from the front of the spacer
strip and the lower edge should align
with the lower edge of the cabinetry
side wall.