Imager Settings; Trigger Settings; Notification Settings - Honeywell CT50 User Manual

DRAFT
Symbology Settings (continued)
Setting
Telepen
TLC 39
Trioptic
2D Postal Settings
OCR

Imager Settings

You should not need to modify the Imager Settings. The Override
Recommended Values setting is disabled by default. The recommended
Imager Settings are designed to work in a wide range of environments
and should only be modified if you have an advanced understanding of
imagers.

Trigger Settings

Use the Trigger Settings to configure how the scan buttons work.
Trigger Settings
Setting
Decode Timeout

Notification Settings

Use the Notification Settings to configure how your CT50 responds when
you scan a bar code.
Notification Settings
Setting
Good Read Notification
Dolphin CT50 Mobile Computer User Guide
Description
Scanning automatically turns off after this
number of seconds if the scan trigger is
pressed and nothing has successfully
decoded.
Description
Enables or disables a good read notification.
The notification consists of a green blink of the
Good Read LED, a short beep, and an optional
short vibration.
Chapter 3 — About the Scanner
Default
Disabled
Disabled
Disabled
Disabled
Disabled
Default
Enabled
Default
20
41