About The Battery; Charge The Battery - Honeywell CT50 User Manual

DRAFT
Chapter 1 — About the Computer Features

About the Battery

The CT50 uses a rechargeable 3.6 Vdc Li-ion battery as its main power
source. The battery has a 14.6 watt hour capacity. Several factors
determine the life of your battery, such as display brightness, display
timeout, input device, extreme temperature, and your usage. Honeywell
recommends that you keep the battery charged at all times to prevent
data loss.
Honeywell recommends that you keep the battery charged at all times to
prevent data loss. When you change the battery, the computer
automatically does into a power-off state and then cold boots.
Caution: The battery used in this device may present a fire or
chemical burn hazard if it is mistreated. Do not disassemble it, heat
it above 100 °C (212 °F), or incinerate it. Dispose of used batteries
promptly. Keep away from children.
Contact your Honeywell representative for replacement batteries.

Charge the Battery

Make sure you fully charge the battery (Model CT50-BTSC) before you
use your CT50. You can charge the battery before or after you install it in
the CT50.
•
or
•
Battery Charge Times
Charging Accessory
eHomeBase
ChargeBase
NetBase
Quad Battery Charger
USB Adapter
Vehicle Power Adapter
6
Insert the battery into a Quad Battery Charger or the battery well of
an eHomeBase.
Insert the CT50 with the battery installed into an eHomeBase,
ChargeBase, NetBase, USB Adapter, or Vehicle Power Adapter.
Charge Time
6 hours
6 hours
6 hours
6 hours
6 hours
6 hours
Dolphin CT50 Mobile Computer User Guide