DRAFT
Chapter 4 — Use the Phone
About the Phone
Phone features on the computer include a speaker and a microphone.
You can also use a Bluetooth headset or hands-free kit. The phone
feature is enabled by default.
The WAN radio in your computer determines the supported network
types:
•
•
After you turn on the phone and activate service with your wireless
carrier, you can customize the phone features and network settings in
the Wireless & Networks section of the Settings app.
Note: Both WWAN radios support Network Information and Time Zone
(NITZ) messages to automatically set the system time.
Activate the UMTS Phone
Activating the UMTS phone on your CT50 is done the same way whether
your computer has the Flexible Network Radio or the UMTS/HSPA+WAN
radio.
You use a SIM card to activate the UMTS phone on the CT50. You can
purchase the SIM card from your network provider.
1 Power off the CT50.
2 Disconnect the handstrap from the bottom of the computer.
3 Press and slide the battery door toward the bottom of the computer
4 Lift up on the edge of the battery and remove it from the computer.
44
If your computer includes the UMTS/HSPA+ WAN radio, you can
connect to UMTS networks.
If your computer includes the Flexible Network Radio, you can
connect to CDMA or UMTS networks in all regions that support these
technologies. The Flexible Network Radio is a software-defined radio
(SDR) that can be configured for CDMA or UMTS depending on your
wireless communication needs.
Honeywell supports these CDMA network carriers:
•
Sprint (United States only)
•
Verizon (United States only)
For other carriers, contact Honeywell Technical Support.
to unlock the door.
Dolphin CT50 Mobile Computer User Guide