How To Connect To Virtual Private Networks; Add A Vpn; Connect To A Vpn - Honeywell CT50 User Manual

DRAFT
4 Tap Ethernet. The Ethernet list shows the name of the current
5

How to Connect to Virtual Private Networks

The computer supports connecting to virtual private networks (VPNs).
This section describes how to add and connect to VPNs. To configure
VPN access, you must obtain details from your network administrator.
You view and change VPN settings in the Settings app.
Note: Before you can access VPNs, you need to set a lock screen PIN or
password.

Add a VPN

Before you can connect to a VPN, you must add VPN information.
1 Start the Settings app.
2 In the Wireless & Networks section, tap More.
3 Tap VPN.
4 Tap Add VPN Profile.
5 Enter information for the VPN.
6 Tap Save. The VPN name appears in the VPN list.

Connect to a VPN

1 Start the Settings app.
2 In the Wireless & Networks section, tap More.
3 Tap VPN.
4 Tap the name of the VPN in the list, and enter any necessary
5
Dolphin CT50 Mobile Computer User Guide
Ethernet connection. By default, the computer assumes a DHCP
connection, and that your network has assigned an IP address
automatically. If DHCP is working, the Ethernet dock should indicate
that communication with the network is occurring.
(Optional) To assign a static IP address, tap the connection
name
(for example, eth0). The IP settings dialog box appears.
a Tap DHCP and then select Static from the list.
b Enter the required network information and then tap Apply.
credentials when prompted.
Tap Connect. The computer connects to the VPN, and a
Status
icon and notification appear.
To disconnect from the VPN, tap the notification.
Chapter 6 — Configure the Computer
63