Arctic Cat Altera 300 Service Manual page 18

XA069
6. Remove the Phillips-head screws with lock nuts and
three cap screws securing each footwell to the vehi-
cle. Remove the footwells.
XA064A
7. Remove the four cap screws securing the rear section
of the front body panel to the frame; then remove the
two cap screws securing the body panel to the gas
tank.
XA065A
XA066
8. Remove the two self-tapping screws securing the
inlet of the CVT intake tube to the front body panel.
XA067
9. From within the front fascia, remove the two cap
screws securing the fascia to the front bumper. From
the front of the vehicle, remove the two cap screws
securing the front of the fascia to the bumper.
XA068A
XA070
10. Remove the Allen-head screw securing the shift
knob to the shift lever. Turn the steering wheel full
left and remove the front body panel.
XA071
17