Tremolo Chorus - Roland RD-2000 Parameter Manual

Modulation FX Parameters
Parameter Value
Pre Delay 0.0–100 [msec]
Rate
OFF, ON
(sync sw)
Rate (Hz) #/
0.05–10.00
Rate (note) # note (p. 60)
Depth 0–127
Phase 0–180 [deg]
Feedback #
-98–+98 [%]
Step Rate
OFF, ON
(sync sw)
Step Rate 0.10–20.00
(Hz) #/
Step Rate note (p. 60)
(note)#
Low Gain
-15–+15 [dB]
High Gain -15–+15 [dB]
D100:0W–
Balance #
D0:100W
Level 0–127
29: HEXA-CHORUS
Uses a six-phase chorus (six layers of chorused sound) to give
richness and spatial spread to the sound.
L in
Balance D
Hexa Chorus
R in
Balance D
Parameter Value
Switch OFF, ON
Depth Knob
RATE,
BALANCE,
DEPTH
Rate Knob
OFF,
Feedback
RATE,
Knob BALANCE,
DEPTH
Pre Delay 0.0–100 [msec]
Rate
OFF, ON
(sync sw)
46
Explanation
Adjusts the delay time from
the direct sound until the
flanger sound is heard.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative
settings will invert the phase.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Rate (period) of pitch change
Gain of the low range
Gain of the high range
Volume balance between
the direct sound (D) and the
flanger sound (W)
Output Level
L out
Balance W
Balance W
R out
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
Parameter
Rate (Hz) #/
Rate (note) #
Depth
Pre Delay
Deviation
Depth
Deviation
Pan Deviation 0–20
"-"
Balance #
Level

30: TREMOLO CHORUS

This is a chorus effect with added Tremolo (cyclic modulation of
volume).
L in
Tremolo Chorus
R in
Parameter
Switch
Depth Knob
Rate Knob
Feedback
Knob
Pre Delay
Chorus Rate
(sync sw)
Chorus Rate
(Hz) #/
Chorus Rate
(note) #
Chorus Depth 0–127
Value Explanation
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
0–127 Depth of modulation
Adjusts the differences in Pre
0–20 Delay between each chorus
sound.
Adjusts the difference in
-20–+20 modulation depth between
each chorus sound.
Adjusts the difference in
stereo location between each
chorus sound.
0:
All chorus sounds will be in
the center.
20:
Each chorus sound will be
spaced at 60 degree intervals
relative to the center.
Volume balance between
D100:0W–
the direct sound (D) and the
D0:100W
chorus sound (W)
0–127 Output Level
L out
Balance D
Balance W
Balance W
R out
Balance D
Value Explanation
OFF, ON Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
CHORUS RATE,
knob.
TREMOLO RATE,
Specifies the parameter
BALANCE
that is controlled by the
MODULATION FX [RATE]
knob.
OFF, Specifies the parameter
CHORUS RATE, that is controlled by the
TREMOLO RATE, MODULATION FX [FEEDBACK]
BALANCE knob.
Adjusts the delay time from
0.0–100 [msec] the direct sound until the
chorus sound is heard.
If this is ON, the modulation
is synchronized to the tempo
OFF, ON
of the rhythm (owner's
manual: p. 24).
0.05–10.00 [Hz]
Modulation frequency of the
chorus effect
note (p. 60)
Modulation depth of the
chorus effect