Changing The Depth Of The Reverb; Changing The Depth Of The Chorus; Changing The Damper Pedal's Resonance - Roland HP 237e Owner's Manual

Owner's Manual
This is set to "4" when the power is turned on..
Holding down the [Reverb] button, press any Tone
button.
Reverb
While holding down...
220,
Electric Electric — Harpsi- Vibra- Pipe F
Piano! Piano2 Piano! Pia hone Organ — Strings
S S 59 C3 CJ CJ
Tone ]
[Softer Reverb]
[Louder Reverb]
...press the button corresponding
to the desired Reverb level
Checking the depth of the Reverb effect
Press and hold the [Reverb] button.
The Tone button indicators will blink to indicate the
selected depth.
6.4 Changing the depth of the
Chorus
The depth of the Chorus effect (p. 11) can be adjust-
ed. There are eight levels to choose from. This is set to
*4" when the power is turned on.
Holding down the [Chorus] button, press any Tone
button.
Chorus
While holding down...
y
; Electric Electric — Harpsi- Vibra- Pi
Piano! Piano? Pianot Piano2 chord phone Organ Strings
ea H eee
Tone
[Softer Chorus] [Louder Chorus]
...press the button corresponding
to the desired Chorus level
16
Checking the depth of the chorus effect
Press and hold the [Chorus] button.
The Tone button indicators will blink to indicate the
selected depth.
6.5 Changing the damper pedal's
resonance
On acoustic pianos, when the damper pedal is
depressed, additional strings are released to resonate
with the sound of the keys that have been played,
adding richness and breadth to the sound. The
damper pedal on the HP-237e recreates this resonance
when depressed. This is called "Sympathetic Reso-
nance".
Eight levels of resonance are available; the higher the
value, the deeper the resonance. This is set to "4"
when the power is turned on.
Holding down the [Reverb] and [Chorus] buttons,
press any Tone button.
Reverb Chorus
Z
ui While holding down...
y
uu ex dg
Electric Electric i
Piano1 Piano2 Pianot Piano2 Organ — Strings
aja DS
[Less [More
Resonance] Resonance]
...press the button corresponding
to the desired Resonance level
Checking the resonance level
Press and hold the [Reverb] and [Chorus] buttons.
The Tone button indicators will blink to indicate the
selected depth.
Note: This resonance works only with the Piano 1 and
Piano 2 tones.