the malfunction persists, refer to the engine
6.5
OPERATION
6.5.1 Forward gear and riding
without mowing
•
•
• shift the throttle control to a point
and «hare» speed positions.
• For models with mechanical drive only:
1.
2.
3.
The pedal has to be released
may cause the vehicle to tip over
and the driver to lose control.
4.
using the throttle and gear lever.
To change gear, press the clutch
• For models with hydrostatic drive only:
1.
2.
Drive can only be engaged following
the procedure illustrated (par. 5.7 to
prevent sudden engagement which may
cause the vehicle to tip over and the driver
6.5.2 Braking
For models with hydrostatic drive only:
6.5.3 Reverse gear
IMPORTANT Reverse must be engaged
when the machine has stopped.
For models with mechanical drive only:
1.
2. Shift the gear lever to "R"
3.
For models with hydrostatic drive only:
1.
2.
6.5.4 Grass cutting
1.
2.
3.
4.
5.
IMPORTANT To proceed in reverse gear
with the cutting means engaged, it is necessary
to press and hold the consent button (par.
5.9) so as not to cause the engine to stop.
–
–