6.1.3 Tyre pressure
1.
2.
3. Adjust the pressure according to the values
indicated in the "Technical Data" chart.
6.1.4 Preparing the machine
before starting work
NOTE This machine can be used to
before starting work, prepare the machine
based on how the lawn is to be mowed.
a. Prepare the machine for side cutting and
(for models with side discharge only)
–
b. Preparation for grass cutting and
collection in the grass catcher (for
rear collection models only)
–
–
of the grass catcher opening is
c. Prepare the machine for rear cutting and
(for models with rear collection only)
–
This has to be attached to the rear
plate as indicated in the instructions.
d. Preparation for mowing and
mulching of grass
–
plate as indicated in the instructions.
6.1.5 Positioning the anti-scalp wheels
6.2 SAFETY CHECKS
those outlined on the tables.
Always carry out the safety
checks before use.
6.2.1 General safety check
Object
Rear discharge guard,
grass catcher
Side discharge
guard, suction grid
Fuel lines and
connections.
Electrical cables.
Oil lines
shift to neutral /
release the drive pedal
(
Test driving
6.2.2 Control of safety devices
A.
B.
Action
1.
2.
operator seated.
EN - 11
Result
Good condition. No
installed.
Good condition. No
installed.
All insulation intact.
Proceed as indicated
in par. 6.2.2
Result
The engine starts