Table of Contents
Advertisement
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coffee funnel lid
A3. Beans container
A4. Pre-ground coffee funnel
A5.
button: turns the appliance on and off (standby)
A6. Cup shelf
A7. Cappuccino maker selection ring
A8. Cappuccino maker
A9. Cappuccino maker nozzle
A10. Coffee spout (adjustable height)
A11. Condensate tray
A12. Cup tray
A13. Drip tray water level indicator
A14. Drip tray
A15. Coffee grounds container
A16. Main switch (ON/OFF)
A17. Power cord
A18. Infuser door
A19. Infuser
A20. Water tank
A21. Water softener filter housing
A22. Water tank lid
A23. Grinding adjustment dial
Description of the touch screen
(page 2 - B )
A number of icons on the touch screen have a double function. This
is indicated in brackets in the description.
B1. OK icon (When in the settings menu, press to confirm the
selection)
B2.
icon: to access or exit the settings menu.
B3. Display
B4.
icon: to select the coffee quantity (When in the
settings menu, press to scroll backwards)
B5.
aroma selection icon: to select the coffee taste
(When in the settings menu, press to scroll backwards)
B6.
icon: to make 2 cups of coffee with the settings
displayed
B7.
icon: to make 1 cup of coffee with the settings
displayed
B8.
icon: to make one LONG coffee
B9.
icon: to make one DOUBLE coffee
B10.
icon: to deliver hot water
B11.
icon: to deliver steam
Description of the accessories
(page 2 - C )
C1. Pre-ground coffee measure
C2. Cleaning brush
C3. "Total Hardness Test" indicator paper
C4. Water softener filter (*certain models only)
C5. Descaler
BEFORE USE
Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De'Longhi
Customer Services.
Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
•
The appliance gives off heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the appliance.
•
Water penetrating the coffee machine could cause dam-
age. Do not place the appliance near taps or sinks.
•
The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
•
Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
Setting up the appliance
Please note:
•
Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
9
Advertisement
Table of Contents
Troubleshooting
