Step
Installation
4
5
8.2. Startup Procedure
To activate your FlatClient Panel PC connect the power supply to power connector on the FlatClient back side.
Alternative use the mating power connector for connecting your power cable. The LED "PWR" gives a green light now.
Don´t hesitate to ask for support:
e-mail:
Phone:
All essential drivers you´ll find on www.snt-embedded.de
www.kontron.com
support@snt-embedded.de
+49 (0)89 37 00 58 - 0
FlatClient ECO and FlatClient PRO – Rev. 1.6
Description
Fix the bracket with the screw to
the housing
Repeat step 4 for all positions of
clamping bracket
// 40