Connection - Sony XCG-C30 Technical Manual

Connection

C-mount lens
Power supply
You can supply power to the camera module using the following methods.
Using the RJ45 connector
This unit supports PoE (IEEE802.3af standard). By using a PoE-compatible LAN cable and camera module interface board or hub,
you can power, control, and output images from the camera using one LAN cable.
When you operate this unit using PoE, heat dissipation is required depending on the usage environment because the inside of the
camera becomes hot.
For heat dissipation, refer to the User's Guide.
Using the DC IN connector
You can supply power via the DC IN connector using the power adapter.
Use DC-700/700CE which is the stable power source free from ripple or noise.
6
Connection
LAN cable
Camera module
Camera cable
Tripod adaptor
VCT-333I
If the HUB supports PoE, the items within the dashed line are not necessary.
Camera module interface board
Camera adaptor
DC-700/700CE
(adopt EIAJ compliant 12-pin
connector pin assignments)
AC
TRIG