Timing Chart; Trigger Latency - Sony XCG-C30 Technical Manual

Timing Chart

Trigger latency

The time from the trigger acceptance to the exposure start (trigger latency) varies depending on various conditions. In
the trigger width detection operation, the value is changed by TriggerControl.
Trigger signal
Exposure
Sensor output
XCG-C30/C
ExposureMode TriggerControl
0
(edge detection)
1
(width detection)
XCG-C32/C
ExposureMode TriggerControl
0
(edge detection)
1
(width detection)
XCG-C130/C
ExposureMode TriggerControl
0
(edge detection)
1
(width detection)
* TriggerControl=0 and TriggerShift=1 cannot be set at the same time.
The settings will be discarded, and TriggerControl=1 and TriggerShift=1 will be used.
28
Timing Chart
Exposure time
Trigger latency
TriggerShift
0
1
0 0
1
1 0
1
TriggerShift
0
1
0 0
1
1 0
1
TriggerShift
0
1
0 0
1
1 0
1
Trigger latency
Approx. 0.7 µs
Approx. 0.7 µs to 16.3 µs
Approx. 6.9 µs
Cannot be set*
Approx. 2.2 µs
Approx. 2.2 µs to 18.8 µs
Trigger latency
Approx. 0.8 µs
Approx. 0.8 µs to 20.3 µs
Approx. 8.7 µs
Cannot be set*
Approx. 2.8 µs
Approx. 2.8 µs to 22.3 µs
Trigger latency
Approx. 1.4 µs
Approx. 1.4 µs to 34.6 µs
Approx. 14.2 µs
Cannot be set*
Approx. 2.4 µs
Approx. 2.4 µs to 35.6 µs
Exposure time
ExposureTime
ExposureTime
ExposureTime
ExposureTime + approx. 5 µs
ExposureTime + approx. 5 µs
Exposure time
ExposureTime
ExposureTime
ExposureTime
ExposureTime + approx. 6 µs
ExposureTime + approx. 6 µs
Exposure time
ExposureTime
ExposureTime
ExposureTime
ExposureTime + approx. 12 µs
ExposureTime + approx. 12 µs