White Balance
The white balance can be automatically adjusted when
the BalanceWhiteAuto command is executed. The
detection area is set to the screen center by default. The
detection area can also be displayed on the screen. The
detection frame can be changed arbitrarily
(DetectAreaWBAuto). For manual correction, the
GainDigital should be executed.
Register
BalanceWhiteAuto
DetectAreaGainAuto
GainDigitalRedRaw
GainDigitalGreenRaw
GainDigitalBlueRaw
30
White Balance
Parameter
Setting
Off (0)
Manual correction
Once (1)
One-push AWB
Continuous
Continuous AWB
(2)
Off (0)
Detection frame is
hidden
On (1)
Detection frame is
displayed
256 (x1) to
Red gain
4096
256 (x1) to
Green gain
4096
256 (x1) to
Blue gain
4096
LUT
Five types of presets are provided. Specify using a 12 bit
value. Binarization, 5-point interpolation, and arbitrary
setting can be changed.
Register
Parameter
LUTEnable
Off (0)
On (1)
LUTFormat
Linear (0)
Reverse (1)
Binarization (2)
LinearInterpolation (3) 5-point interpolation
UserSet (4)
1. LUT off
2. Reverse
4. 5-point
5. Arbitrary setting
interpolation
Binarization
The binarization threshold can be changed.
Register
BinarizationThreshold
0 to 2047 to 4096
5-point interpolation
The values of output points 1 through 5 that correspond
to input points 1 through 5 can be changed. Linear
interpolation is performed between interpolation points.
Register
Parameter
LinearInterpolation-
Index1(1) to
Index
Index(5)
LinearInterpolation-
0 to 4095
InValue
LinearInterpolation-
0 to 4095
OutValue
LinearInterpolation-
Build
Setting
LUT off (γ=1)
LUT on
Linear (γ=1)
Reverse
Binarization
Arbitrary setting
3. Binarization
Parameter
Setting
Select the interpolation
points
Input
Output
Build LUT