Device Attributes - ABB COM600 series 5.0 Technical Reference Manual

4.4.4.
36
COM600 series 5.0
Slave Protocols (Ethernet) and Applications Technical Refer-
ence Manual
Property / Para- Value or Value range/ Default
meter
Received S format
messages
Received U format
messages
Received messages
TCP Connect count
TCP Accept count
TCP Close count
Duplicates and
losses
Buffer overflow
errors

Device attributes

Table 4.4.4-1 Device attributes
Property / Para- Value or Value range/ Default
meter
Basic
In use 0 = Out of use
1 = In use
Default: 1
Diagnostic Events True = Diagnostic events
Enabled enabled
False = Diagnostic events dis-
abled
Status Information
Connection Status True = Device connection OK
False = Device connection
suspended.
Description
The number of received supervisory mes-
sages.
The number of received unnumbered
messages.
The number of received messages.
The count of TCP connect request.
The count of accepted TCP connect
request.
The count of closed TCP connection.
The number of times duplicates and losses
has occurred.
The number of times there as been a buf-
fer overflow.
Description
The operational status of the device - in
use or out of use. Taking the device out
of use with this attribute stops all data
communication with the device. All opera-
tions that would result in a data exchange
are disabled. The device itself is not
affected by the attribute, only the protocol
stack's image of the device. Setting In use
to 1 is allowed only if the device address
is legal.
This attribute enables or disables dia-
gnostic events.
Indicates the status of the device connec-
tion.
1MRS758692