ABB COM600 series 5.0 Technical Reference Manual page 73

1MRS758692 COM600 series 5.0
Slave Protocols (Ethernet) and Applications Technical Refer-
ence Manual
group 3
group 4
group 5
group 6
Information Object Addresses assigned to each group must
be defined.
Clock synchronization (station-specific parameter)
Clock synchronization
Command transmission (object-specific parameter)
Direct command transmission
Direct set point command transmission
Select and execute command
Select and execute set point command
C_SE ACTTERM used
No additional information
Short pulse duration (duration determined by a system parameter in the outstation)
Long pulse duration (duration determined by a system parameter in the outstation)
Persistent output
Supervision of maximum delay in command direction of commands and set point com-
mands.
Maximum allowable delay of commands and set point commands
Transmission of integrated totals (station parameter or object-specific
parameter)
Mode A: Local freeze with spontaneous transmission
group 9
group 10
group 11
group 12
group 15
group 16
73