Acsi Service Conformance Statement - ABB COM600 series 5.0 Technical Reference Manual

3.1.4.
18
COM600 series 5.0
Slave Protocols (Ethernet) and Applications Technical Refer-
ence Manual
M8-6 BufTm
M8-7 IntgPd
M8-8 GI
M8-9 conf-revision
Logging
M9 Log control
M9-1 IntgPd
M10 Log
M11 Control
If GSE (B31/32) is supported
GOOSE
M13 GSSE
If SVC (41/42) is supported
M14 Multicast SVC
M15 Unicast SVC
M16 Time
M17 File Transfer
c1 – shall be 'M' if support for LOGICAL-DEVICE model has been declared.
c2 – shall be 'M' if support for LOGICAL-NODE model has been declared.
c3 – shall be 'M' if support for DATA model has been declared.
c4 – shall be 'M' if support for DATA-SET, Substitution, Report, Log Control, or Time
model has been declared.
c5 – shall be 'M' if support for Report, GSE, or SMV models has been declared.
M - Mandatory

ACSI service conformance statement

The ACSI service conformance statement shall be as defined in Table 3.1.4-1 (depending
on the statements in Table 3.1.3-1).
Client/Sub- Server/Pub-
scriber lisher
O O
O O
O O
M M
O O
O O
O O
O O
M M
O O
1MRS758692
Value/Comments
-
-
-
SUPPORTED
SUPPORTED (send)
-
-
-
-