ABB COM600 series 5.0 Technical Reference Manual page 68

68
COM600 series 5.0
Slave Protocols (Ethernet) and Applications Technical Refer-
ence Manual
<40> :=Packed output circuit information of protection
equipment with time tag CP56Time2a
Either the ASDUs of the set <2>, <4>, <6>, <8>, <10>, <12>, <14>, <16>, <17>, <18>,
<19> or of the set <30> - <40> are used.
Process information in control direction (station-specific parameter)
<45> :=Single command
<46> :=Double command
<47> :=Regulating step command
<48> :=Set point command, normalized value
<49> :=Set point command, scaled value
<50> :=Set point command, short float point value
<51> :=Bitstring of 32 bit
<58> :=Single command with time tag CP56Time2a
<59> :=Double command with time tag CP56Time2a
<60> :=Regulating step command with time tag
CP56Time2a
<61> :=Set point command, normalized value with time tag
CP56Time2a
<62> :=Set point command, scaled value with time tag
CP56Time2a
<63> :=Set point command, short floating point value with
time tag CP56Time2a
<64> :=Bitstring of 32 bit with time tag CP56Time2a
Either the ASDUs of the set <45> - <51> or of the set <58> - <64> are used.
System information in monitor direction (station-specific parameter)
<70> :=End of initialization
1MRS758692
M_EP_TF_1
C_SC_NA_1
C_DC_NA_1
C_RC_NA_1
C_SE_NA_1
C_SC_NB_1
C_SC_NC_1
C_BO_NA_1
C_SC_TA_1
C_DC_TA_1
C_RC_TA_1
C_SE_TA_1
C_SE_TB_1
C_SE_TC_1
C_BO_TA_1
M _EI_NA_1