ABB COM600 series 5.0 Technical Reference Manual page 70

70
COM600 series 5.0
Slave Protocols (Ethernet) and Applications Technical Refer-
ence Manual
Type identifier and cause of transmission assignments
(station-specific parameters)
•
Shaded boxes are not required
• Black boxes are not permitted in this companion standard
• Blank = Function or ASDU is not used
• Mark Type identification/Cause of transmission combinations:
• 'X' if supported only in the standard direction
• 'R' if supported only in the reverse direction
• 'B' if supported in both directions
1MRS758692