Connecting The Model 6471 To Your Computer; Opening The Ground Tester Control Panel - AEMC 6471 User Manual

8.2 Connecting the Model 6471 to your Computer

The Model 6471 is supplied with an optically isolated USB interface cable required
for connecting the instrument to the computer. This cable (Cat. #2135.41) is
equipped with a USB type A on one end, and an optical connector on the other
end.
To connect the Model 6471 to your computer:
1. Connect the optical connector end of the cable to the serial port on the
front panel of the Model 6471 (see Figure 2-1, Item #4).
2. Connect the USB type A end of the cable, to an available USB port on
your computer.
You are now ready to use the DataView

8.3 Opening the Ground Tester Control Panel

To open the Control Panel, double-click the Ground Tester Icon that was created
during installation, located on the desktop.
Ground Resistance Tester Model 6471
Shop for AEMC products online at:
®
Figure 8-4
ShopAEMC
www.
software with the 6471.
.com
57
1.888.610.7664