Installation - Mitsubishi Electric PQRY-P72TLMU-A Manual

13. INSTALLATION

13-1. PQRY-P-T(S)LMU/Y(S)LMU's Installation
1. No direct thermal radiation to the unit.
2. No possibility of annoying the neighbors by the sound of the unit.
Valves and refrigerant flow on the Heat source unit may generate noise.
3. Avoid the sites where strong winds blow.
4. With strength to bear the weight of the unit.
5. Drain flow from the unit is cared at heating mode.
6. Enough space for installation and service as shown at 13-2.
7. Avoid the sites where acidic solutions or chemical sprays (sulfur series) are used frequently.
8. The unit should be secure from combustible gas, oil, steam, chemical gas like acidic solution, sulfur gas and so on.
13-2. Installation Space
In case of a single unit installation, 23-11/16 in. (600mm) or more of clearance space in the front of the unit makes for easier access
when servicing the unit.
350(13-13/16)
© 2017 Mitsubishi Electric US, Inc.
The space for
control box
replacement
Top view
Service space
(front side)
880(34-11/16)
PQRY-P-T(S)LMU, Y(S)LMU (April 2017 Ver2)
600(23-5/8)
450(17-3/4)
Service space
The space for
(front side)
control box
replacement
Unit: mm (in.)
WR2-145