Getting Started; What Ip Phones Need To Meet; Yealink Ip Phones In A Network - Yealink SIP-T58V/A Administrator's Manual

Getting Started

This chapter describes where Yealink IP phones fit in your network and provides basic
installation instructions of SIP-T58V/T58A/T56A IP phones.
This chapter provides the following sections:

What IP Phones Need to Meet



Yealink IP Phones in a Network


Connecting the IP Phones

Initialization Process Overview

Verifying Startup

What IP Phones Need to Meet
In order to operate as SIP endpoints in your network successfully, IP phones must meet the
following requirements:
A working IP network is established.

VoIP gateways are configured for SIP.

The latest (or compatible) firmware of IP phones is available.

A call server is active and configured to receive and send SIP messages.

Yealink IP Phones in a Network
Yealink IP phones can connect physically through a Category 5E (CAT 5E) cable to a
10/100/1000Mbps Ethernet LAN, and send and receive all data using the same packet-based
technology. They can also connect to the wireless network.
Since the IP phone is a data terminal, digitized audio being just another type of data from its
perspective, the phone is capable of vastly more than traditional business phones. Moreover,
Yealink IP phones run the same protocols as your office personal computer, which means that
many innovative applications can be developed without resorting to specialized technology.
Getting Started
7