Before You Begin; Getting Started; Hardware Overview - Yealink One Talk W78B User Manual

Before you begin

This guide provides information you need to quickly use your new phone.
Firstly, verify with your system administrator that the IP network is ready for phone configuration. Also, be sure to read the Quick Start Guide
which can be found in your phone package before you set up and use the phone. As you read this guide, keep in mind that some features are only
configurable by your system administrator or determined by your phone environment. As a result, some features may not be enabled or may be
operated differently on your phone. Additionally, the examples and graphics in this guide may not directly reflect what is displayed or is available
on your phone screen.

Getting started

Before you use your phone, take some time to get familiar with its features and user interface.

Hardware Overview

Understanding the phone hardware helps you easily use the phone's features.
W78B base station hardware
After the base station starts up successfully and the handset is registered to the base station, all LEDs on the base station
glow green.
No. Item
1. Registration LED
2. Network Status LED
3. Power LED Indicator
4.
Paging Key
Description
Indicates the handset registration status or the base station is in the paging mode.
Indicates the network status.
Indicates the power status of the base station.
•
Locates a misplaced handset
•
Toggles the registration mode
•
Resets the base station to factory settings
User guide
5