Sensor Alignment Kit - Siemens LDS 6 Operating Instructions Manual

Appendix A: Toolkits
CD 6C – Water vapor sensor for LDS 6
A5E00912721-01
6.2

Sensor Alignment Kit

The Sensor Alignment Kit (shown in Figure 6.3) is used for instal-
lation and re-alignment of the sensors. The kit includes five tools,
described in the table below, and an instruction for alignment of
the sensors. The instruction is found on the inside of the case.
Position
Blue line
Figure 6.3 CD 6C alignment kit
Designation
1 Hook spanner
2 Allen keys, 3 mm and 6 mm
3 Alignment flange
4 Light source
5 Lubricant, copper based
37