Piston And Piston Pin Inspection - Linhai LH400CUV-2 Service Manual

CHAPTER 3 ENGINE

PISTON AND PISTON PIN INSPECTION

1. Measure:
Piston skirt diameter
Out of specification → Replace .
○
5.0mm from the piston bottom edge.
a
Valve skirt diameter:
69.965-69.980 mm
2. Calculate:
Piston-to-cylinder clearance
Piston-to-cylinder clearance=
Cylinder bore-Piston skirt diameter
Refer to "CYLINDER" section for cylinder bore
measurement.
Out of specification → Replace the piston and
piston rings as a set.
Piston-to-cylinder clearance:
3. Measure:
Piston pin bore diameter
Out of specification → Replace.
Piston pin bore diameter:
17.004-17.015mm
<Limit:17.045mm>
4. Measure:
Piston pin outside diameter
Out of specification → Replace.
Piston pin bore diameter:
16.991-17.000mm
<Limit:16.975mm>
5. Inspect:
Piston pin
Blue discoloration/groove → Clean or replace.
0.02-0.04mm
ATV SERVICE MANUAL 2005/ version number 0501
CHAPTER 3 ENGINE PAGE. 3- 34