Linhai LH400CUV-2 Service Manual page 202

CHAPTER 8 ELECTRICAL
CUV SERVICE MANUAL 09.0
Segment"RES"should blink.
With the fuel level sensor float at the top (FULL)
position, turn the ignition switch to "ON" and
check the fuel gauge. All segments up to
segment "F"should come on.
If the fuel gauge does not function properly,
check the fuel level sensor
If the fuel level sensor is OK, replace the LCD
Meter.
RESISTANCE(20℃/
FLOAT POSITION
68°)
Fuel level Sensor Inspection
Disconnect the fuel level sensor 2p Green
TOP(FULL) 4-10Ω
connector and connect the ohmmeter to the
BOTTOM(RESERVE) 100-110Ω
sensor side connector terminals.
Measure the fuel level sensor resistance with the
float at the top (FULL)
And bottom (RESERVE) positions.
CHAPTER 8 ELECTRICAL CTRICAL PAGE 8- 37