5. Install the screws to secure the computer cover.
6. Place the computer in an upright position.
7. If a locking device is available, lock the computer cover. See "Locking your computer" on page 55.
8. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 27.
9. Update the configuration of your computer. See "Using the Setup Utility program" on page 59.
10. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 52.
168
ThinkStation P310 Hardware Maintenance Manual