Lenovo ThinkStation P310 Hardware Maintenance Manual page 139

5. Press the release tab
Figure 83. Pivoting the drive bay assembly upward
6. Disconnect the front audio and USB assembly cables from the system board. See "Parts on the
system board" on page 34.
Note: Ensure that you note the locations of the cables when you disconnect the cables from the
system board.
7. Remove the screw that secures the front audio and USB assembly bracket to the chassis. Remove
the bracket from the chassis.
Figure 84. Removing the front audio and USB assembly
1 as shown and pivot the drive bay assembly upward.
.
Chapter 9 Installing or replacing hardware
133