Lenovo ThinkStation P310 Hardware Maintenance Manual page 119

2. Lift the clip on the rear of the flex module and slide the flex module cover to the rear to remove the cover.
Figure 44. Removing the flex module cover
3. If you are installing a new slim optical drive, press the two metal clips
the two screws as shown. Remove the two screws and then go to step 4.
Figure 45. Removing the plastic clip with the two screws
If you are replacing an old slim optical drive, do the following:
a. Press the button as shown to remove the slim optical drive from the flex module.
Figure 46. Removing the slim optical drive from the flex module
1 to remove the plastic clip with
.
Chapter 9 Installing or replacing hardware
113