2. Install a screw to secure the Wi-Fi card module to the Wi-Fi adapter card.
Figure 121. Installing a screw to secure the Wi-Fi card module
3. Connect the front antenna cable and rear antenna cable to the Wi-Fi card module.
Figure 122. Installing the Wi-Fi antenna cables
4. Install the Wi-Fi adapter card into the PCI Express x1 slot on the system board. See "Parts on the
system board" on page 34.
5. If the installed Wi-Fi card module supports the Bluetooth function, connect a Bluetooth cable from the
Bluetooth connector on the Wi-Fi adapter card to the USB 2.0 connector on the system board.
160
ThinkStation P310 Hardware Maintenance Manual