6. Stick the front antenna to the front panel as shown. Then insert the front antenna cable into the hole in
the front panel.
Figure 126. Installing the front Wi-Fi antenna
7. Connect the front antenna cable to the Wi-Fi card module.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.
Removing the front Wi-Fi antenna
To remove the front Wi-Fi antenna, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 90.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 90.
.
Chapter 9
Installing or replacing hardware
163