Installing Or Replacing The Solid-State Drive - Lenovo ThinkStation P310 Hardware Maintenance Manual

3. To install a new enclosure fan, align the four holes in the new fan with the corresponding tabs on the fan
bracket. Push the fan onto the enclosure until the fan is secured in place.
Figure 76. Installing the fan in the enclosure
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.

Installing or replacing the solid-state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Installing the solid-state drive
To install the solid-state drive, do the following:
128
ThinkStation P310 Hardware Maintenance Manual