Introduction; Unpacking; Preliminary Recommendation - Tannoy VSXNET Series Operation Manual

High-performance subwoofers

Hide thumbs Also See for VSXNET Series:

Table of Contents

2. Introduction

Designed, engineered and built in the United Kingdom, the VSXNET Series from Tannoy comprises of one

band-pass and two direct-radiating subwoofers for demanding professional and commercial sound applications.

Within the VSXNET Series, system designers can choose from a variety of sizes, power levels and low frequency

characteristics to suit particular requirements.

As indicated by their respective suffixes, the VSXNET 12.2BP is a band-pass device, while the VSXNET 15DR

and VSXNET 18DR are direct radiating models. The three band-pass model incorporates Tannoy's latest

engineering philosphies in band-pass enclosure design, optimising tonal balance and harmonic output through

precisely engineered enclosure geometry and innovative transducer design.

For ease of installation, connections are on integrated, recessed termination panels equipped with both

NL4 speakON

and barrier strip connectors. The speakON connectors are angled and recessed to allow flush

mounting to a wall or ceiling.

All VSXNET Series subwoofers are housed in rugged, durable birch ply enclosures with ergonomic Integrip™

carry handles and an integrated pole-mount recess. Coupling VSXNET Series subwoofers to VX and VXP Series

full-range loudspeakers via the optional VTH pole mount facilitates portable PA applications without need for

tripod stands.

Each Tannoy VSXNET Series subwoofer is carefully tested and inspected prior to shipment. After unpacking,

please check for any exterior physical damage, and save the carton and any relevant packaging materials in

case the unit again requires packing and shipping. In the event that damage has been sustained in transit, notify

your dealer and the shipping carrier immediately.

VSXNET Series subwoofers can produce high sustained output levels for long periods of time. If users are in

close proximity, these levels could lead to permanent hearing damage. Because Tannoy loudspeakers

have a natural-sounding, flat frequency response and very low distortion, users may not be aware of the potential

hazard. For continuous exposure to high levels, we recommend use of a sound level meter to ensure noise

levels are within safety limits. The meter should be capable of integrating levels over a period of exposure in

conformance with noise control standards.

VSXNET Subwoofer Operation Manual rev 2.0.0

Table of Contents