Table of Contents
Advertisement
8. Software Installation
8.1 Updating Firmware
Occasionally it may be necessary to update the devices firmware (with file extension .dfw); this may be due to
added features or amendments to the VNET product. Check with your dealer/distributor or (www.tannoypro.com)
for any applicable updates.
Firmware can be updated over the network (no need to disconnect speakers from the network).
A firmware update will be common to all VNET products (one file for all models).
Updating a devices firmware is straight forward:-
1. Download and save the new firmware file to disk.
2. From the toolbar select 'Device' & 'Start Firmware' Loader.
3. The following message will appear.
4. Click 'OK'.
5. Browse to the new firmware file & select. The following message will appear stating the old version number
& the replacement version number.
6. Click 'OK'.
7. In order for the new firmware to take effect the unit has to be switched off & back on again. This can be
done automatically after the update. Click 'OK' to confirm.
20
VSXNET Subwoofer Operation Manual rev 2.0.0
Advertisement
Table of Contents
