Introduction; Unpacking; Connectors/Cabling - Tannoy VS15 HL User Manual

1.

Introduction

The Tannoy VS15HL is a horn-loaded subwoofer with very high output capability
designed to provide maximum low frequency impact in conjunction with Tannoy V
Series loudspeakers.
The tight and "punchy" sound of the VS15HL adds depth and dramatic impact for a
wide variety of sound reinforcement applications. This powerful loudspeaker is capable
of delivering remarkable sound pressure levels with extremely low levels of distortion
and power compression, while maintaining a uniform frequency response throughout
its dynamic range.
The V15HL comprises one high efficiency 380mm(15") drive unit. The cabinet is
constructed from multiple-ply hardwood, which will survive the punishment that
speaker systems are subjected to on the road and in club installations. The compact
dimensions of the V15HL enable it to be used in permanent or portable applications
without being obtrusive.
The VS15HL features recessed carrying handles rigging points, and blank plate for a
top-mounted stand socket, which serves as a base for locating the main full range or
mid/high speakers in the air. By using 35mm tubing the need for a tripod stand can be
eliminated.
2.

Unpacking

Every Tannoy VS15HL is carefully inspected before packing. After unpacking your
loudspeaker, please inspect for any exterior physical damage, and save the carton and
any relevant packaging materials in case the loudspeaker again requires packing and
shipping. In the event that damage has been sustained in transit notify your dealer
immediately.
3.

Connectors/Cabling

The VS15HL is fitted with 4-pole Neutrik Speakon connectors. Speakon has the
following advantages over EP and XLR type connectors: All terminations are solderless;
this makes life easier at the time of installation or when field servicing is required.
Contacts will accept 6 sq. mm wires with an outside diameter of up to 15mm and a
current rating of 30 Amps. The pins of the 2 Speakon sockets on the input panel are
paralleled within the enclosure. Tannoy has adopted the conventional wiring standard
for the VS15HL product: -
For a worldwide list of Neutrik distributors see http://www.neutrik.com/
Pin 1+ is Positive
Pin 1- is Negative