Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tannoy VS15 HL
Summary of Contents for Tannoy VS15 HL
- Page 1 VS15 HL USER MANUAL...
-
Page 2: Table Of Contents
CONTENTS Introduction 2. Unpacking 3. Connectors/Cabling 4. Amplification & Power Handling 5. Crossovers 6. Equalisation/Positioning 7. Dimensions 8. Technical Specifications 9. Rigging & Suspension General Safety Advice SECUR ET – VTH Pole Mount SECUR ET – VEB Eyebolt 10. System Configurations & OEM Controllers 11. -
Page 3: Introduction
Introduction The Tannoy VS15HL is a horn-loaded subwoofer with very high output capability designed to provide maximum low frequency impact in conjunction with Tannoy V Series loudspeakers. The tight and “punchy” sound of the VS15HL adds depth and dramatic impact for a wide variety of sound reinforcement applications. -
Page 4: Amplification & Power Handling
Cable choice consists mainly of selecting the correct cross sectional area in relation to the cable length and the load impedance. A small cross sectional area would increase the cables series resistance, inducing power loss and response variations (damping factor). Connectors should be wired with a minimum of 2.5 sq. -
Page 5: Crossovers
Crossovers The VS15HL has been designed to be used in conjunction with Tannoy controllers for optimum performance, these provides specific crossover and equalisation functions for the V series combinations as well as combinations of other Tannoy products. Of course the VS15HL is compatible with other OEM controllers/crossovers. For optimum performance please refer to the section on System Configurations &... -
Page 6: Rigging & Suspension
Qualified personnel trained in safe rigging practices should only suspend the system. Whenever a Tannoy Professional loudspeaker is fixed to a surface using a Tannoy Professional hardware device, the installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and securely, attached both to the loudspeaker and also to the surface in question, using only the fixing holes provided. -
Page 7: Secur Et - Veb Eyebolt
SECUR ET – VEB Eyebolt The Tannoy VS15HL loudspeaker can be flown with high quality VEB M10 eyebolts with collar to BS4278:1984. The loudspeaker is equipped with internal steel braces, which also double as the flying points, and accept VEB M10 eyebolts. -
Page 8: System Configurations & Oem Controllers
With the vast array of digital loudspeaker management systems available it is inevitable that the user may opt to use a controller other than a Tannoy controller as part of a large scale integrated system. The VS15HL has been designed to need no external equalisation to overcome system limitations. -
Page 9: Vs15Hl Service Parts & Accessories
Warranty No maintenance of the VS15HL loudspeaker is necessary. All Tannoy professional loudspeaker products are covered by a 5 year warranty from the date of manufacture subject to the absence of misuse, overload or accidental damage. Claims will not be considered if the serial number has been altered or removed. -
Page 10: Declaration Of Conformity
Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment.
Need help?
Do you have a question about the VS15 HL and is the answer not in the manual?
Questions and answers