Table of Contents
Advertisement
6. Operation
6.6 User DSP On/Off
A user DSP On/Off switch is provided on the amp panel. This miniature switch is recessed and can be easily
activated with a small screwdriver.
The switch in the 'OFF' position will return the VNET loudspeaker back to the original factory settings, this basically
means that any parameter edited in software (EQ, Crossover, Mute, Delay) can be defeated by activating this
switch. This can be a very useful feature. Example:-
In a large corporate production the networked loudspeakers are been used by an operator who has been using
the Podware software for editing EQ & gain & delay; at the end of the performance he mutes the loudspeakers
from within the software and the loudspeakers are returned to 'hire stock' after the performance. Next day there
is a rush for a small hire comprising only a couple of VNET loudspeakers. The speakers are taken to the small gig
where the operator is not making use of the Networking, or Podware software in this particular instance.
He realizes that he muted the loudspeakers the night before, and this particular pair had 100 ms of delay applied!!
All he has to do is flick the 'USER DSP' switch to the 'OFF' position (assuming he is carrying his Leatherman) and
any of the USER editable parameters in Podware are defeated.
8
VSXNET Subwoofer Operation Manual rev 2.0.0
Advertisement
Table of Contents
