Introduction; Unpacking; Connectors/Cabling - Tannoy VS18 DR User Manual

1
.
Introduction
The Tannoy VS1 8DR is a direct radiating subwoofer designed to compliment Tannoy V
series loudspeakers where high definition sound reinforcement at low/ultra low
frequencies with increased headroom is required.
The VS1 8DR extends the frequency response of systems to below 30Hz, making it ideal
for club, theatre and concert sound applications. This powerful loudspeaker is capable
of delivering high sound pressure levels with extremely low distortion and power
compression while maintaining a uniform frequency response throughout its dynamic
range.
The VST 8DR comprises one high efficiency 458mm (18") drive unit. The cabinet is
constructed from multiple-ply hardwood, which will survive the punishment that
speaker systems are subjected to on the road and in club installations.
The VS1 8DR features recessed carrying handles rigging points, and blank plate for a
top-mounted stand socket, which serves as a base for locating the main full range or
mid/high speakers in the air. By using 35mm tubing the need for a tripod stand can be
eliminated.
2. Unpacking
Every Tannoy VS1 8DR is carefully inspected before packing. After unpacking your
loudspeaker, please inspect for any exterior physical damage, and save the carton and
any relevant packaging materials in case the loudspeaker again requires packing and
shipping. In the event that damage has been sustained in transit notify your dealer
immediately.
3. Connectors/Cabling
The VS1 8DR is fitted with 4-pole Neutrik Speakon connectors. Speakon has the
following advantages over EP and XLR type connectors: All terminations are solderless;
this makes life easier at the time of installation or when field servicing is required.
Contacts will accept 6 sq. mm wires with an outside diameter of up to 1 5mm and a
current rating of 30 Amps. The pins of the 2 Speakon sockets on the input panel are
paralleled within the enclosure. Tannoy has adopted the conventional wiring standard
for the VS15HL product: -
Pin 1 + is Positive
Pin 1 - is Negative
For a worldwide list of Neutrik distributors see http://www.neutrik.com/