Siemens Sonoline G20 Quick Reference Manual page 5

Medical
Reviewing and Selecting Images/Studies on DIMAQ
Press REVIEW on the control panel
To Select
 An image on Image Screen
 A study on Study Screen
 Multiple non-consecutive studies
Multiple consecutive studies

Transfer Cases to CD
Press REVIEW on the Control panel to activate Study Screen
1. Trackball to desired study and highlight (will appear blue)
2. Insert Blank CD or rewriteable with your cases on it
3. Press EXPORT to CD
4. Wait until highlighted case turns " blue"
5. CD will pop out briefly and reinsert prior to turning "Blue"
6. Press CD on the study screen to check if case has successfully loaded
7. Press EJECT on Study Screen or at the CD loader to eject
8. Press SELECT or Live Screen to Resume Scanning
Powering off system
Turn off system by pressing blue power switch located on the
1. Turn off system by pressing blue power button on the left front of the control panel
2. Wait under monitor goes black before removing power cord from wall
G20 Quick Reference
Do this:
Using TRACKBALL position cursor on image and press

SET key
 Position cursor on study and press SET
Position cursor and hold Ctrl key for additional studies.

Press SET key
 Select a single study. Place cursor on last desired study.
Press SHIFT key and SET
Page 5