Operation; Touchscreen Display; Adjusting The Display Brightness; Configuring The Backlight - GE IC755CxW07CD SERIES User Manual

5 Operation

5.1 Touchscreen Display

Operation
For public disclosure
The QuickPanel + Operator Interface features a LED Backlit LCD touchscreen display
with two-point touch technology. The touch technology is based on projected capacitance,
which allows tracking of the finger without pressured contact and is conducive to smooth
scrolling and multi-touch gesturing capability. Display brightness and backlight operation
can be set using the operating system Control Panel.
Caution

5.1.1 Adjusting the Display Brightness

� � To adjust the brightness of the display
From the Control Panel, double-tap Display and select the Brightness tab to
1.
display the Brightness window.
2. Drag the Brightness slider bar between Lowest and Highest.
Tap OK to exit the control panel.
3.
4. Run the Backup Utility

5.1.2 Configuring the Backlight

� � To configure the backlight
From the Control Panel, double-tap Display and select the Backlight tab to display
1.
the Backlight Display Properties window.
Select Automatically turn off backlight while on external power.
2.
Backlight Display Properties
Tap OK to exit the control panel.
3.
Run the Backup Utility
4.
Although we recommend the use of the protective sheet,
do not operate the touchscreen with any hard materials,
such as a screwdriver. This could damage the
touchscreen display.
to save the settings.
to save the settings.
GFK-2847F User Manual 47