Installation Procedure - GE IC755CxW07CD SERIES User Manual

4.4 Installation Procedure

To order replacement gaskets,
refer to the part number listed
in Appendix B.
Panel Thickness:
1.0 to 5.0 mm
(0.04 to 0.20 in)
IC755CxW07CDx Panel Cutout Dimensions
Panel Thickness:
1.6 to 5.0 mm
(0.06 to 0.20 in)
IC755CxS12CDx Panel Cutout Dimensions
Installation
For public disclosure
Observe the following guidelines to properly mount and install the QuickPanel
Interface:
• To properly mount the QuickPanel
• The metal enclosure panel should ensure proper thickness and rigidity suitable to
minimize impact to the QuickPanel
• To avoid gasket degradation, limit repeated insertions or removals of the unit and
retightening of the mounting clips. For full protection, always use a fresh gasket.
• The unit will not fit through the cutout with any cables connected, or with the power
supply plug inserted in the socket.
Caution
� � To install the QuickPanel
1. Cut an opening in the panel according to the specifications in the following figures.
Note Panel cutout tolerances are +0.50, –0.00 mm (+0.02, –0.00 in).
183.50 mm (7.22 in)
302 mm (11.89 in)
+
, the enclosure should be of metal material.
+ .
When installing the QuickPanel
careful attention while handling the unit so it does not
drop and damage the unit.
+
Panel Thickness:
1.6 to 5.0 mm
(0.06 to 0.20 in)
IC755CxS10CDx Panel Cutout Dimensions
Panel Thickness:
1.6 to 5.0 mm
(0.06 to 0.20 in)
IC755CxS15CDx Panel Cutout Dimensions
+
Operator
+ into the panel, pay
266 mm (10.47 in)
379 mm (14.92 in)
GFK-2847F User Manual 31