4 Installation
4.1 Installing the Protective Sheet
Installation
For public disclosure
This chapter provides the following procedures for installing the QuickPanel
Interface:
•
Installing the Protective Sheet
•
Choosing a Mounting Location
•
Panel Mounting
•
Mounting on a VESA Arm
•
Installing and Replacing the Battery
•
Connectors
� � To install the protective sheet
1.
Remove the protective film on the screen of the QuickPanel
2.
Wipe the display of any dust or fingerprints.
3.
Peel a corner of the clear side of the protective sheet.
4.
Begin applying the corner to the display.
Slowly apply the rest of the protective sheet, smoothing out as you go.
5.
6.
Peel the green curing film from the protective sheet.
+
Operator
+
.
GFK-2847F User Manual 27