2.4 Runtime Setup
2.5 Firmware Updates
Pre-installation Checks
For public disclosure
2.3.2 Initial Configuration
When you first start up the QuickPanel
� � To configure the QuickPanel
1.
Tap Start
, point to Settings, then tap Control Panel.
From the Control Panel, double-tap Date and Time to configure the system clock.
2.
From the Control Panel, double-tap System to configure a Network Device Name.
3.
Many applications, including Proficy Historian, require a unique Device Name.
Attention
From the Control Panel, double-tap Network and Dial-up Connectionsto
4.
configure network settings.
Run the
Backup Utility
5.
To download an application to a QuickPanel
between the unit and your development workstation. Refer to the section
IC755CxW07CDx and
IC755CxSxxCDx, and the Proficy Machine Edition (PME) online
help, Downloading a Machine Edition Project.
Update the unit to the most recent released version of the firmware with the latest feature
upgrades and issues addressed. Firmware updates for the QuickPanel
Support
website.
+
, a few configuration steps are necessary.
+
It is recommended to set a unique Device Name for
the QuickPanel
+
to avoid future conflicts.
to save the settings.
+
Operator Interface, set up a data link
Ethernet for
+
are available on the
GFK-2847F User Manual 19