Connectivity; Infrared; Transmission Types; Getting Started - SoftBank 920SC User Manual

Connectivity

Transfer files wirelessly between 920SC and other
®
Infrared or Bluetooth -compatible devices, or
connect 920SC to PCs or printers via USB Cable.

Transmission Types

Transfer files via Infrared or Blutooth
Transmission
Type
Receive single files/send multiple
files. Received files are
Transfer Each
automatically saved to the
appropriate location by file type.
Receive/send all files by function at
Transfer All
once.
Most received files are saved to the appropriate
●
location by file type, however, some may be saved
to Other documents in Data Folder.
11
11-2

Infrared

Exchange files wirelessly with infrared-compatible
handsets, PCs or other devices.

Getting Started

920SC Infrared is based on IrMC1.1. Transmission
●
®
may be unavailable for some functions, even when
as follows.
IrMC1.1 is supported on the other party's handset.
Description
Infrared data transmission is unavailable while
●
sending/receiving message or using Internet.
Calling or sending mail are unavailable during
●
Infrared transmissions.
Transmissions may be inhibited in direct sunlight,
●
under fluorescent lighting or near infrared devices.
Authorization Code is the 4-digit password used to
●
allow transmissions between infrared devices.
Enter same Authorization Code on both devices
when transmitting all files at once.

Infrared Precautions

Place devices within 30 cm. Align device ports. Do
●
not place objects in between devices.
Within 30 cm
Infrared Port
Maintain port alignment until transmission ends.
●
A soiled port may inhibit transmission. Clean port
●
with a soft cloth beforehand.
If transmission fails, a confirmation appears. Review
●
precautions, choose Yes to try again.