Alarm - SoftBank 920SC User Manual

Viewing Calendar Memory Status
c → Calendar → o → Memory status
Sending Schedule as vFile
c → Calendar → Select a date → Highlight a
schedule → o → Send
■ To send via message
f
Via message → ( P.4-3 Sending S! Mail b)
■ To send via Bluetooth
f
Via bluetooth → ( P.11-7 Sending b)
■ To send via infrared
f
Via infrared (
P.11-3)
Saving Schedule as vFile
c → Calendar → Select a date → Highlight a
schedule → o → Save to data folder → Phone
or Memory card → Yes
Save location can be set to Memory Card if inserted.
●
8
Printing Schedule via Bluetooth
c → Calendar → Select a date → Highlight a
schedule → o → Print via bluetooth →
f
( P.6-14 Printing via Bluetooth
8-18

Alarm

Saving Alarm
c → Tools → Alarms → Alarm1 to Alarm5 →
Enter Alarm time
■ To edit Alarm name
Select Alarm name field → Enter Alarm name →
w (Save)
■ To set Alarm every day or once only
®
Select Repeat field → Once only or Everyday →
w (Save)
■ To set Alarm for a specific day
Select Repeat field → Selected day → Check day
to set → w (Done) → w (Save)
■ To set Alarm sound or video
Highlight Alert tone/video field → Select folder →
Highlight file → w (Play) → o (Select) →
w (Save)
If a Memory Card file is set as Alarm Sound, copy
●
®
to 920SC confirmation appears. For a copy
protected file, move to 920SC confirmation
appears. Choose Yes to complete setting.
®
e)
■ To adjust Alarm volume
Select Volume field → Use a to adjust volume
→ w (Play) → c (OK) → w (Save)
■ To set Vibration
Select Vibration field → Off or Pattern 1 to
Pattern 5 → w (Save)
■ To set Snooze
Select Snooze field → Off, 1 minute, 3 minutes, 5
minutes, 10 minutes, or Other → w (Save)
When Snooze is other than Off, alarm sounds at
●
the specified interval until Snooze is canceled.
Alarm repeats specified times. If no handset
operations take place, or any key except y and
o (End) is pressed while alarm sounds, alarm
stops, and resets to sound again at specified
interval.
To cancel Snooze, press y or o (End).
For Other, enter duration.
●
■ To set Snooze repeat time(s)
Select Snooze repeat times field → Once, 2 times,
3 times, 5 times, or 10 times → w (Save)
■ To set Alarm duration time
Select Duration field → 10 seconds, 20 seconds,
30 seconds, 60 seconds, or Other → w
(Save)
For Other, enter duration.
●
Setting/Canceling Alarm
c → Tools → Alarms → Highlight an Alarm →
w (On/Off)
Resetting Alarm
c → Tools → Alarms
■ To reset an entry
Highlight an Alarm → o → Reset this
■ To reset all entries
o → Clear All